Buyers often ask what they are actually paying for beyond the wood. A large part of it is process control. Here is how a flitch becomes a graded, backed veneer sheet in our Dongguan plant.
1. Log selection
We sort incoming logs by species and defect. Only flitches with the grain and colour the customer ordered move forward; the rest are diverted to engineered (reconstituted) lines.
2. Steaming and softening
Hardwoods are steamed to soften the fibres so they slice cleanly without splintering — especially important for walnut and cherry.
3. Slicing and drying
Veneer is sliced to 0.6–2.0 mm, then dried on a mesh conveyor to a controlled moisture level (see our moisture-content post).
4. Grading
Every sheet is graded A / B / C for face and back. We keep the grade consistent within a single order so a 500-sheet run looks like one batch, not ten.
5. Backing and slitting
Face veneers are fleece- or paper-backed for stability; the same face is then slit into edge banding rolls so your banding matches your sheet exactly.
6. Final inspection and packing
Before cartons are sealed we re-check thickness, colour match and MC, and photograph the batch for traceability.
None of these steps are glamorous, but together they are what lets a buyer order 5,000 sheets and receive 5,000 that match.
If you are specifying veneer, edge banding or panels for an upcoming project and want consistent colour and moisture across the order, send us a message or call Amanda Song on +86 138 2727 7319 (WhatsApp +852 6761 5532). We usually reply within 24 hours.